Saw in the cleaner of raw cotton from large contaminants cleaning the distance between the chimneys in the working part of the drum analysis to study the effect on effectiveness Oglu Juraev Davron Amir1, Isayevich Safarov Davron2, Abdinazarovich Berdimuratov Javli3 1Assistant, Termez Institute of Engineering and Technology, Uzbekistan, Email id: djurayevdavron27@gmail.com 2Assistant, Termez Institute of Engineering and Technology, Uzbekistan 3Assistant, Termez Institute of Engineering and Technology, Uzbekistan Online Published on 23 May, 2022. Abstract This article introduces changes to the equipment for large-scale decontamination of raw cotton, including the brush drum parts located in the UHC unit, and increased the efficiency of the equipment. The equipment for cleaning cottonseed from large contaminants mainly consists of a supply roller, a pile-bar drum, a saw drum, a brush drum and a dead conveyor. The function of the brush drum is to transfer the seed cotton from the pile-plank drum to the saw drum and to separate the contaminated seed cotton from the saw drum teeth and transfer it to the next process. In our experiment we used rubber to separate the cotton from the steel blades and saw drum teeth instead of the built-in brush drum brushes for conveying the seed cotton. the blade separator was replaced by drums. This has led to the elimination of defects such as abrasion, breakage, overheating, increased cleaning efficiency, work productivity. Top Keywords Seed Cotton, Fiber, Seeds, Impurities, Coarse Impurities, Brush Drum, Iron Drum Drum, Rubber Blade Separating Drum, Cleaned, Saw Drum. Top |