Determination the flow of experimental modeling waxes by using vicat apparatus Taqa Amer A.1,*, Hatim Nadira A.2, Alubaidi Ahmad W.3 1Professor, Dept. of Basic Science, College of Dentistry, University of Mosul, Iraq 2Professor, Dept. of Prosthetic, College of Dentistry, University of Mosul, Iraq 3Assistant Lecturer, Dept. of Prosthetic, College of Dentistry, University of Mosul, Iraq *Corresponding Author: Email: amertaqa@hotmail.com
Online published on 3 January, 2019. Abstract Aim of the study Evaluation the flow of a new experimental modeling waxes. Materials and methods: synthesis of one hundred twenty (120) samples of different modeling waxes by mixing different percentages of local natural waxes (hard paraffin, soft paraffin and beeswax) and additives (starch, gum Arabic, rosin and Na-CMC (Na-carboxymethylcellulose)) using mold made from brass according to ADA specification No.24, then measure the flow of them by using vicat apparatus after making modification. Results: The experimental modeling wax (80% hard paraffin+20% soft paraffin) and (80% beeswax+20% soft paraffin) had the most nearest properties to control (Poly wax) at 40°and 45°C and experimental modeling wax (90% beeswax +10% Starch) to control (Major) at 40°C and experimental modeling waxes (80% beeswax+20% hard paraffin), (80% hard paraffin+15% soft paraffin+5% beeswax), (70% hard paraffin+20% soft paraffin+10% Beeswax) and (90% Beeswax+10% Starch) to control (Major) at 45°C. Conclusions: Flow of waxes showed increased with the increasing heating the temperature from 40°C to 45°C. Top Keywords Flow, Wax, Vicat apparatus. Top |