Indian Journal of Cryogenics
Year 2021, Volume-46, Issue-1 (January)
Print ISSN : 0379-0479
Online ISSN : 2349-2120 Table of contents Preface Dr. V. Narayanan, Dr. T. John Tharakan Editorial T.S. Datta Influence of low temperature and flow properties in dynamic behaviour of cryogenic pipelines Pillai R. Perumal, Dhas K. Murugha DOI:10.5958/2349-2120.2021.00001.7 Thermal simulations and experimental validation for the induction of indigenously developed copper alloy in regeneratively cooled Cryogenic vernier engines A.N. Adarsh, Siju K. Mathew, A.P. Baiju, K.S. Bijukumar, N. Jayan, G. Nageswaran DOI:10.5958/2349-2120.2021.00002.9 Development of polyurethane-based heat shielding coating for cryo-insulation K. Monisha, Vibhu Unnikrishnan, Remya Balakrishnan, A. Suresh Kumar, A.M. Nallaperumal DOI:10.5958/2349-2120.2021.00003.0 Cycle selection and performance evaluation of tripropellant engines with LOX/CH4/LH2 and LOX/RP1/LH2 combinations G. Rohit, Deepak Agarwal, K.S. Bijukumar, N. Jayan DOI:10.5958/2349-2120.2021.00004.2 Challenges in designing a POGO suppression device for cryo environment Sunny Mitra, Mathew Saxon, Aneesh Rajan, P. Sajeev DOI:10.5958/2349-2120.2021.00005.4 Composite cryo tank development- ISRO initiatives Sandeep Kumar, Basil Eldhose, G. Prasanna DOI:10.5958/2349-2120.2021.00006.6 Experimental investigation of cavitation inside a plain orifice injector Vikash Kumar, Vaisakh S. Nair, T. John Tharakan, Abhilash Suryan DOI:10.5958/2349-2120.2021.00007.8 Evaluation of temperature profile of a cryogenic engine igniter body during engine operation and coasting phase prior to engine restart Siju K. Mathew, Dr. K. S. Bijukumar, A. P. Baiju, N. Jayan, G. Nageswaran DOI:10.5958/2349-2120.2021.00008.X Design and realization of thrust measurement system for high altitude testing of cryogenic rocket engine A. Cross Sapna, D. Gayathri Devi, S. Rajapandian, L. Louis Sam Titus DOI:10.5958/2349-2120.2021.00009.1 CFD analysis of stratification during draining of a sub-scaled liquid hydrogen tank Rajat Kumar Bhuyan, Deepak Kumar Agarwal, Sunil Kumar Sarangi DOI:10.5958/2349-2120.2021.00010.8 Studies on premoulded pad for cryo insulation P. S. Nikhil, K. Monisha, V. Unnikrishnan, Remya Balakrishnan, A. Suresh Kumar, A. M. Nallaperumal DOI:10.5958/2349-2120.2021.00011.X Passive recirculation system for eliminating geysering in liquid oxygen feed system of cryogenic propulsion stage Saurabh K. Joy, K. V. Rijin, M. Xavier DOI:10.5958/2349-2120.2021.00012.1 Numerical prediction of nozzle behavior of the CE-20 engine for developing a nozzle protection system (NPS) for testing at sea level S. Behal, P.S. Virdi, M. Kumar, A. S. Ramasubramanian, T. K. Nandi DOI:10.5958/2349-2120.2021.00013.3 Development and validation of a numerical model to investigate sloshing phenomena with baffles Atharv Kotwal, B.H. Ankita Pai, Aditya Raman, M.D. Atrey DOI:10.5958/2349-2120.2021.00014.5 Real-time communication for ground testing of cryogenic engines and stages of Indian space missions Poofa Gopalan, D. Gayatri Devi, S. Rajapandian DOI:10.5958/2349-2120.2021.00015.7 Thermal design and analysis of 70 K octagonal passive radiant cooler Subrahmanya, V Jaikumar, Tanneru Sai Goutam, D. W. Tijare DOI:10.5958/2349-2120.2021.00016.9 Investigation of transfer line cool-down transients using equilibrium two-phase models Keerthi Raj Kunniyoor, Rahul Govind, K. S. Venkateswaran, Parthasarathi Ghosh DOI:10.5958/2349-2120.2021.00017.0 Qualification of onboard software for cryogenic stages Kurian John, V. Jayanthy, T. Gopalakrishnan, B. Valsa DOI:10.5958/2349-2120.2021.00018.2 Analysis of rocket propulsion test data using multi-sensor data fusion technique Mallappa, S. Ramesh, D. G. Chandra, A. Rajan, T. K. Nandi DOI:10.5958/2349-2120.2021.00019.4 Numerical analysis of fluid transient during ground testing of Cryogenic propellant feed system R. G. Bhuvana, Parthasarathi Ghosh, P. Ganesh DOI:10.5958/2349-2120.2021.00020.0 Cold flow testing and CFD analysis of screw pump for LOX pump of semi-cryogenic engine T. V. Sanand, Deepak Dinesh, K. Harikumar, Unnikrishnan P. Nair DOI:10.5958/2349-2120.2021.00021.2 Development of a numerical model to predict self-pressurization and thermal stratification in a cryogenic storage vessel S.B. Vishnu, Biju T. Kuzhiveli DOI:10.5958/2349-2120.2021.00022.4 Design and experimental validation of a high flow rate pyrogen igniter for cryogenic engine testing K. Sreekanth, Priyanka Shukla, R. Resmi, N. Vinod Kumar DOI:10.5958/2349-2120.2021.00023.6 Primary jet breakup dynamics in a coaxial air blast atomizer: Effect of nozzle geometry and air swirl on jet instabilities and atomization Abhijeet Kumar, Srikrishna Sahu DOI:10.5958/2349-2120.2021.00024.8 Vibration and speed envelope analysis of cryogenic pumps induced during cavitation R.P. Uma Dhevi, E. Ezhilrajan, S. Rajapandian DOI:10.5958/2349-2120.2021.00025.X Influence of aspect ratio and fill: Level on the thermal de-stratification in an upright cylindrical tank subjected to lateral sloshing motion Aditya Raman, Ankita B H Pai, M. D. Atrey DOI:10.5958/2349-2120.2021.00026.1 Sensitivity studies on the effect of axial clearances on the turbine efficiency Sanand T.V., Deepak Dinesh, K. Harikumar, P. Unnikrishnan Nair DOI:10.5958/2349-2120.2021.00027.3 Criticalities in high pressure cryogenic test facilities A.S. Ramasubramanian, S. Antony Manicka Raja, V. Michael Packiaraja DOI:10.5958/2349-2120.2021.00028.5 Liquid nitrogen storage and distribution system for 6.5-meter large thermal vacuum chamber-LTVC Pawan Kumar, B. Gorai, V. Poonia DOI:10.5958/2349-2120.2021.00029.7 Instrumentation design considerations for automatic ground testing of rocket engines A. Siva Vasanth, J. Stalin, A. Benzigar Rajan DOI:10.5958/2349-2120.2021.00030.3 Top |