Modeling, Design & Analysis of Straight Bevel Gear and Pinion by FEM, Solid works & Ansys Benchwork 14.0 Tiwari Praveen Kumar1, Singh Er. Nikhilesh N.2, Dr. Sinha Prabhat Kumar2 1M. Tech. Scholar, Dept. of Mechanical Engineering, SHUATS, Allahabad, Uttar Pradesh, India 2Assistant Professor, Department of Mechanical Engineering, SHUATS, Allahabad, Uttar Pradesh, India Online published on 31 October, 2017. Abstract In this research developing an analytical approach, modeling and analysis to evaluate stress distribution, natural frequencies and predict the life of the gear and pinion under the plateform of ANSYS 14.0 with the help of solid works modeling. The function of gears to provide proper gearing for transmission. These gears must typically operate at extremely high rotational speeds and carry high power level Bevel gears are used to transmit the power between two intersecting shafts at almost any angle or speed. Various forces acting on the gear has been calculated. The purpose of this work is to analyze and validate the stress distribution in bevel gears using contemporary FEM program and ANSYS 14.0 the design of the gear housing should incorporate a methodology for dealing with factors causing vibrations and to promote scientific means to minimize the effect of frequencies. This vibration analysis is done by using ANSYS 14.0 software as a computational technique and validation Keywords natural frequencies, stress distribution, ANSYS 14.0 Top Keywords Modeling, ANSY, BEVEL. Top |