|
|
(18.218.234.83)
|
Users online: 5640
|
|
|
|
|
|
Ijournet
|
|
|
|
|
Design of Metamaterial Based High Pass Filter Using CSRR at Cut Off Frequency 0.9 Ghz Duvey Ashish1,*, Sharma Shandeep, Sharma Gulshan2 1Department of Electronics, Shri Ram College of Engineering and Management, Gwalior 2Department of Electronics, Madhav institute of Technology & Science, Gwalior *a.duvey@yahoo.co
Online published on 8 November, 2017. Abstract In this work, highly selective filters based on periodic arrays of electrically small resonators are pointed out. The highpass filters are implemented in microstrip technology by etching complementary split ring resonators (CSRRs), in the ground plane, and series capacitive gaps, or interdigital capacitors, in the signal strip. The structure exhibits a composite right/left handed (CRLH) behavior and, by properly tuning the geometry of the elements, a high pass response with a sharp transition band is obtained. Top | |
|
|
|
|
║ Site map
║
Privacy Policy ║ Copyright ║ Terms & Conditions ║
|
|
744,564,101 visitor(s) since 30th May, 2005.
|
All rights reserved. Site designed and maintained by DIVA ENTERPRISES PVT. LTD..
|
Note: Please use Internet Explorer (6.0 or above). Some functionalities may not work in other browsers.
|